Tire/ wheel Service Equipment
    Return to main product lists
New Event
Nitrogen Generator and Conversion System for Single Tyre Application

Dimensions (Height*Width*Depth)                                              1255mm*720mm*435mm


Net Weight                                                                                                    89kg/196.2lbs

Gross Weight                                                                                             106kg/233.7lbs

Packing Size (height*Width*Depth)                                              1380mm*730mm*510mm 


Power Requirement                                                                         100-240Vac  50/60HZ

Power Consumption                                                                                                    30VA

Operating Temperature Range                                                      -20/-4F to 70/158F

Compressed Air Input Range                                             87-123PSI/6-8.5bar/600-850kPa

Compressed Air Input Flow                                                                     250L/min (8.0cfm)

Nitrogen Purity                                                                                                        95-99+%

Nitrogen Output:                    58L/min (2.0cfm) @116PSI/8bar/800kPa absorption pressure

Maximum Nitrogen Pressure in Tank:                                                      102PSI/7bar/700kPa

Operating Range                                                                     5-90PSI/0.3-6.2bar/35-620kPa

Resolution                                                                                                    1PSI/0.1bar/5kPa

Units of Measurement                                                                                            PSI/bar/kPa

Model: ZD-E-1135-N2P

Converts the tyre to Nitrogen at the touch of a button **

Auto-Start Inflation *

Over Pressure Setting (OPS)

Single Tyre Application

Suit for: Motorcycle, Car, Light Truck

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Automatic zero drift adjustment

6. Remain at last setting

7. Audible and visual end of the cycle signal indicators

8. Self-diagnostic features

9. Vandal resistant mechanical switches

10. Large backlight LCD display

11. 1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

12. Comprehensive diagnostics and error reporting

13. Nitrogen purge and fill cycle (N2P)

14. Nitrogen purity test port

15. Adjustable over pressure setting (OPS)

16. Adjustable number of cycles

17. Adjustable lower purge pressure limit

18. Auto Shut-Off

19.   19. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun


ZD-E-1135-N2P Operation Steps:

1.  1.  Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

2. Connect air hose to tyre valve stem.

3. FOR TOP-OFF ONLY: Push the FILL/PURGE button once. 

    FOR NITROGEN CONVERSION: Push and hold the FILL/PURGE button for 2 seconds until the LCD screen shows N2P.

4.   4. When unit beeps and the LCD screen flashes the target pressure, tyre inflation is complete.

Cntop Auto Equipment Co., Ltd
Copyright 2013 All rights reserved
Contact us!
We're not around, but we'd love to chat another time.